Search Our Site


Technician

Virtual Tour

Rheem Oil Furnaces Print E-mail

Classic Series: Up to 86.5% AFUE ECM and PSC Motors

Classic Series: Up to 86.5% AFUE ECM and PSC Motors

  • Models ROCB-E, ROCB-P
  • Input ratio form 70 to 105 kBTU
  • Low profile
  • Control board works with ECM and PSC motors

 

Rheem Classic® Series Highboy/Horizontal Low Profile Oil Furnaces with PSC/Direct Drive Motor

Features:

  • Available with Front and Rear Flue (ROCB07204M) or with Front Flue Only (ROCB07204P)
  • Highboy, Horizontal, Left or Right Discharge
  • Low Profile 44-1/2"
  • Efficiencies up to 86.5%
  • 3 Firing rates
  • 2-4 Tons A/C
  • 2 Large Accessible Clean Out Posts
  • 3 Pass Heat Exchanger
  • Can be installed with Beckett AFG, Carlin E2 or Riello F3 and BF3 Burners
  • Quick Disconnects on Burner Harness
  • Control Board works with PSC and ECM
  • Limited Lifetime Warranty
  • This unit can be direct vented with the Riello BF3 Burner. Direct vent kits available

 

Available with Front and Rear Flue (ROCB07204M) or with Front Flue Only (ROCB07204P)

• Highboy, Horizontal, Left or Right Discharge
• Low Profile 44-1/2"
• Efficiencies up to 86.5%
• 3 Firing rates
• 2-4 Tons A/C
• 2 Large Accessible Clean Out Posts
• 3 Pass Heat Exchanger
• Can be installed with Beckett AFG, Riello or Carlin E2, F3 and BF3 burners
• Quick Disconnects on Burner Harness
• Control Board works with PSC and ECM
• Limited Lifetime Warranty
• This unit can be direct vented with the Riello BF3 Burner. Direct vent kits available

 

Warranties

Oil Heat Exchanger - Limited Lifetime
Any Other Parts - 5 Years

 

___________________________________________________________________________________________________

Classic Series: Up to 85.9% AFUE ECM and PSC Motors

 

Classic Series: Up to 85.9% AFUE ECM and PSC Motors

  • Models ROCA-E, ROCA-E and ROLA-P
  • Hi Boy ROCA-E, ROCA-P (ECM Motor)
  • Lo Boy ROCA-E, ROCA-P (PSC Motor)
  • Efficiencies up to 85.9%
  • Input Rates from 85,500 to 175,000 BTU/HR

 

The Rheem Classic Series® upflow oil furnace is for installation in properly ventilated utility rooms, closets or alcoves. 
  • Direct Drive blower assemblies for heating and air conditioning applications

  • 10-gauge primary and 14-gauge secondary heat exchanger

  • Front clean out ports extend through front wall for accessibility

  • Efficiencies up to 85.9%  

  • All furnaces have standard Honeywell controls   

  • Available with Beckett, Riello Carlin burners 

  • Extended vestibule on all units

  • ECM blower assemblies for heating and air conditioning applications

  • ECM Control board located in furnace vestibule

  • ECM controls set for 2-stage air conditioning, 2-stage heat pump back up

 

Warranties

Parts Warranty - 5 Years

Heat Exchanger - Limited Lifetime